Это одна из статей раздела «Полезно знать». Отобразить Все темы > Ноутбуки Acer
Ещё близкие по теме статьи:
Today I show how to remove and replace screen in an Acer Aspire One A0751h netbook (Model ZA3).
This tutorial may work for some other Acer Aspire One models. If it works for you, please mention the model in comment after the post.
Before you start, make sure the netbook turned off and battery removed.
ШАГ 1.
There are six rubber seals on the display bezel.
You’ll find six screws securing the bezel under these seals.
You can remove the screw seal with a sharp object.
After screw seals removed, glue them somewhere so they don’t get lost.
Remove all six screws found under the seals.
ШАГ 2.
Start separating the bezel from the display cover with your fingers.
ШАГ 3.
Continue separating the bezel until it’s removed.
ШАГ 4.
The bezel has been removed.
ШАГ 5.
Remove two screws from the right screen mounting bracket.
ШАГ 6.
Remove two more screws from the left mounting bracket.
ШАГ 7.
Disconnect the web camera cable.
Separate the microphone from the cover (it’s glued to the cover with double sticky tape).
ШАГ 8.
Now you can separate the screen from the display cover.
ШАГ 9.
Place it the front side down on the keyboard.
Carefully separate the video cable from the back (the cable glued to the back with double sticky tape).
Disconnect the video cable from the connector.
Now you can remove the screen and replace it with a new one.
The best way to find a new compatible screen is searching by the model number.
In my Acer Aspire One A0751h netbook I had the following model installed: B116XW02
This is a 11.6? LED-backlit LCD.
In the previous post I explain how to disassemble the same Acer Aspire One A0751h netbook.
Всё! Ноутбук разобран. Сборка происходит в обратном порядке, если у вас возникнут сложности вы всегда можете обратиться к специалистам.
Другие статьи из раздела Полезно знать: